AirLink Communications Raven X HSDPA Guida Utente Scaricare il pdf (Pagina 5)

Sierra Wireless AirLink Solutions January 2009 5

Using a Sierra Wireless AirLink Raven X or Raven-E with a

Cisco Router

Configuring the Raven X or Raven-E

a. Click on Connect.

b. Select UDP.

c. Type in the modem’s local IP address (default is 192.168.13.31).

d. Type in the modem’s password (default 12345).

FIGURE 2. Wireless Ace: Connect

Private Mode

In this mode, the Raven X or Raven-E communicates with the Cisco router via a static local IP

address.

a. Set the *HOSTPRIVMODE to 1.

b. Set the *HOSTPRIVIP to the IP address for the router (in the example, 192.168.13.30).

c. Verify the *HOSTPEERIP is the local IP address of the modem (in the example this is

192.168.13.31).

d. Set the *HOSTNETMASK to the Subnet Mask (generally 255.255.255.0).

Connect your Raven X or Raven-E directly to the Ethernet port on your computer and to power.

Start Wireless Ace and connect to your Raven X or Raven-E.

Start > All Programs > AirLink Communications > Wireless Ace 3G > Wireless Ace 3G

If you don’t know the IP of your modem, you can connect to it using the Ethernet

option for “Connect to Modem”. Your modem should be automatically detected.

Select PPP/Ethernet from the menu on the left side of Wireless Ace (under “Groups”).

1 2 3 4 5 6 7 8 9 10 11

Nessun commento

AirLink Communications Raven X HSDPA Guida Utente Pagina 5